BKLJQ - SCORPIO/A CUTTING AND GOUGING ELECTRODE
- MSDS: BKLJQ
- Manufacturer: EAST WEST RESEARCH
- Product Name: SCORPIO/A CUTTING AND GOUGING ELECTRODE
- National Stock Number: 3439-00-453-5950
Product Identification
Product ID:SCORPIO/A CUTTING AND GOUGING ELECTRODE
MSDS Date:01/01/1987
FSC:3439
NIIN:00-453-5950
MSDS Number: BKLJQ
Responsible Party
NOVATO, CA 94947-5791
US
Emergency Phone: 415-883-2517
Info Phone: 415-883-2517
Cage: 60217
Contractor
Telephone: 415-883-2517
Cage: 60217
Ingredients
IRON
CAS: 7439-89-6
RTECS: NO4565500
Fraction By Weight: 29-39%
OSHA PEL 10 MG/M3 (OXIDE)
ACGIH TLV: 5 MG/M3 (OXIDE)
CELLULOSE (PAPER FIBER)
CAS: 9004-34-6
RTECS: FJ5691460
Fraction By Weight: 15-25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9192
SILICON DIOXIDE
CAS: 67762-90-7
Fraction By Weight: 8-16%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
SODIUM SILICATE
CAS: 1344-09-8
Fraction By Weight: 2-12%
OSHA PEL 3 MG/M3
POTASSIUM SILICATE
CAS: 1312-76-1
OSHA PEL 3 MG/M3
GRAPHITE, NATURAL
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: 4-14%
OSHA PEL 15 MPPCF RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
MAGNESITE
CAS: 546-93-0
RTECS: OM2470000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
POTASSIUM HYDROXIDE (SARA III)
CAS: 1310-58-3
RTECS: TT2100000
OSHA PEL C, 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES AND GASES CAN BE DANGEROUS TO
YOUR HEALTH. ARC RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK
CAN KILL. NOISE CAN DAMAGE HEARING.
Effects of Overexposure:ACUTE:METALLIC TASTE,NAUSEA,TIGHTNESS OF
CHEST,FEVER,DIZZINESS,DRYNESS,IRRITATION OF EYES,NOSE AND THROAT.
CHRONIC:EXCESSIVE LEVELS MAY CAUSE BRONQUIAL ASTHMA,LUNG FIBROSIS
AND PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:AGGRAVATION OF EXISTING RESPIRATORY
OR ALLERGIC CONDITIONS.HIGHER LEVEL OF LUNG RELATED PROBLEMS AMONG
SMOKERS.
First Aid
First Aid:REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL ATTENTION. IF
NOT BREATHING,GIVE CPR/OXYGEN. EMPLOY FIRST AID TECHNIQUES
RECOMMENDED BY AMERICAN RED CROSS.
Fire Fighting
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS. WELDING ARC AND SPARKS
CAN IGNITE COMBUSTIBLE AND FLAMMABLE PRODUCTS.
Accidental Release
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN APPROPIATE DISPOSAL CONTAINER.
Handling
Handling and Storage Precautions:STORE IN DRY AREA. ELECTRODES EXPOSED
TO MOISTURE MAY EXPLODE VIOLENTLY IF USED. DRY MOIST RODS BY BAKING
AT 300F FOR TEN HOURS.
Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE
FUMES.MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES.AVOID ELECTRICAL
SHOCK BY MAINTAINING DRY WORK AREA. WELDING ARC CAN IGNITE
COMBUSTIBLES AND FLAMMABLES.
Exposure Controls
Respiratory Protection:FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR IN
CONFINED SPACES OR WHERE VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:SUBSTANTIAL DARK CLOTH,ARM
PROTECTOR,APRON,HAT AND SHOULDER PROTECTION. AIR SAMPLING TO
DETERMINE CORRECTIVE MEASURES.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING,SMOKING OR
USING SANITARY FACILITIES.
Supplemental Safety and Health
NONE.
Chemical Properties
HCC:N1
Appearance and Odor:SOLID ROD.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS AND METAL OXIDES FROM
ELECTRODE AND BASE METAL, CARBON MONOXIDE, CARBON DIOXIDE, OZONE,
NITROGEN OXIDES.
Disposal
Waste Disposal Methods:CONSULT WITH YOUR LOCAL ENVIRONMENTAL
OFFICER.DISPOSE OF FUMES,FLUX OR WELD GRINDING RESIDUE FROM THE
WORK AREA OR FROM FILTERS IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.